User:Wesley Miller - Revision history

David Laidlaw at 18:36, 23 August 2016

2016-08-23T18:36:31Z

← Older revision		Revision as of 18:36, 23 August 2016
Line 1:		Line 1:
	I worked as a visiting RPI undergraduate on $G maintenance and CAVE applications from the summer of 2012 to the summer of 2014. I worked on my Master's degree at Brown from then until May 2016.		I worked as a visiting RPI undergraduate on $G maintenance and CAVE applications from the summer of 2012 to the summer of 2014. I worked on my Master's degree at Brown from then until May 2016.

			Legacy info

	My summer 2012 project was to get [[CavePainting]] building again on CS and CCV systems, which required work with [[MMotion]], [[Kuchora]], [[VRG3D]], and [[VRPN]]. The resulting instructions can be found at [[Building CavePainting]]; however, as of May 2016, they are out-of-date.		My summer 2012 project was to get [[CavePainting]] building again on CS and CCV systems, which required work with [[MMotion]], [[Kuchora]], [[VRG3D]], and [[VRPN]]. The resulting instructions can be found at [[Building CavePainting]]; however, as of May 2016, they are out-of-date.

Wesley Miller at 19:16, 28 May 2016

2016-05-28T19:16:37Z

← Older revision		Revision as of 19:16, 28 May 2016
Line 1:		Line 1:
	I worked as a visiting RPI undergraduate on $G maintenance and CAVE applications from the summer of 2012 to the summer of 2014. I worked on my Master's degree at Brown from then until May 2016.		I worked as a visiting RPI undergraduate on $G maintenance and CAVE applications from the summer of 2012 to the summer of 2014. I worked on my Master's degree at Brown from then until May 2016.

	My summer 2012 project was to get CavePainting building again on CS and CCV systems. The resulting instructions can be found at [[Building CavePainting]]; however, as of May 2016, they are out-of-date.		My summer 2012 project was to get [[CavePainting]] building again on CS and CCV systems, which required work with [[MMotion]], [[Kuchora]], [[VRG3D]], and [[VRPN]]. The resulting instructions can be found at [[Building CavePainting]]; however, as of May 2016, they are out-of-date.

	From then until becoming a Master's student, I worked mostly on $G maintenance and nightly build tests.		From then until becoming a Master's student, I worked mostly on $G maintenance and nightly build tests. Information about these systems can be found at [[Automatic Build System]] and [[Software tests]]. I did not implement the test systems, but I fixed many projects which were failing nightly build and/or run tests, including [[CavePainting]]. I also worked on other applications for the CAVE and YURT in this time, including [[Building ParaView]], [[Integrating Scalable with ParaView]], and [[ADVISER]].

	My work on making the Vrui toolkit compatible with the CAVE and YURT as well as our research applications can be found at https://github.com/jonovotny/VruiScalable. As of May 2016, it is managed by [[User:Johannes Novotny\|Johannes Novotny]].		My work on making the Vrui toolkit (http://keckcaves.org/software/vrui) compatible with the CAVE and YURT as well as our research applications, MeshViewer and 3DVisualizer, can be found at https://github.com/jonovotny/VruiScalable. As of May 2016, it is managed by [[User:Johannes Novotny\|Johannes Novotny]].

	Data from my Master's project, ''Virtually Visualizing Vessels: A Study of the Annotation of Placental Vasculature from MRI in Large-scale Virtual Reality for Surgical Planning'', is in a private repository also under the management of [[User:Johannes Novotny\|Johannes Novotny]]. As of May 2016, the thesis has been submitted to the department, and it will be listed on http://cs.brown.edu/research/pubs/theses/masters/; we are also preparing to submit it to TVCG.		I also, along with [[User:Johannes Novotny\|Johannes Novotny]] and [[User:Josh Tveite\|Josh Tveite]] as well as [[User:David Laidlaw\|David]] and collaborators from Virginia Tech, worked on running a user study, which required the use of Vrui and MeshViewer, and writing "Effects of Display Fidelity and Platform on Analysis Performance with Biological Datasets in Virtual Reality" to submit to Vis 2016.

			Data from my Master's project, ''Virtually Visualizing Vessels: A Study of the Annotation of Placental Vasculature from MRI in Large-scale Virtual Reality for Surgical Planning'', is in a private repository also under the management of [[User:Johannes Novotny\|Johannes Novotny]]. The project required the use of Vrui and 3DVisualizer. As of May 2016, the thesis has been submitted to the department, and it will be listed on http://cs.brown.edu/research/pubs/theses/masters/; we are also preparing to submit it to TVCG.

Wesley Miller at 21:25, 26 May 2016

2016-05-26T21:25:55Z

← Older revision		Revision as of 21:25, 26 May 2016
Line 1:		Line 1:
	I worked as a visiting RPI undergraduate on $G maintenance and CAVE applications from the summer of 2012 to the summer of 2014. I worked on my Master's degree at Brown from then until May 2016.		I worked as a visiting RPI undergraduate on $G maintenance and CAVE applications from the summer of 2012 to the summer of 2014. I worked on my Master's degree at Brown from then until May 2016.

	My ~~work~~ on ~~making the Vrui toolkit compatible with the CAVE~~ and ~~YURT as well as our research applications~~ can be found at ~~https://github.com/jonovotny/VruiScalable. As of this writing, it is managed by~~ [[~~User:Johannes Novotny\|Johannes Novotny~~]].		My summer 2012 project was to get CavePainting building again on CS and CCV systems. The resulting instructions can be found at [[Building CavePainting]]; however, as of May 2016, they are out-of-date.

	Data from my Master's project, ''Virtually Visualizing Vessels: A Study of the Annotation of Placental Vasculature from MRI in Large-scale Virtual Reality for Surgical Planning'', is in a private repository also under the management of [[User:Johannes Novotny\|Johannes Novotny]]. As of ~~this writing~~, the thesis has been submitted to the department, and it will be listed on http://cs.brown.edu/research/pubs/theses/masters/; we are also preparing to submit it to TVCG.		From then until becoming a Master's student, I worked mostly on $G maintenance and nightly build tests.

			My work on making the Vrui toolkit compatible with the CAVE and YURT as well as our research applications can be found at https://github.com/jonovotny/VruiScalable. As of May 2016, it is managed by [[User:Johannes Novotny\|Johannes Novotny]].

			Data from my Master's project, ''Virtually Visualizing Vessels: A Study of the Annotation of Placental Vasculature from MRI in Large-scale Virtual Reality for Surgical Planning'', is in a private repository also under the management of [[User:Johannes Novotny\|Johannes Novotny]]. As of May 2016, the thesis has been submitted to the department, and it will be listed on http://cs.brown.edu/research/pubs/theses/masters/; we are also preparing to submit it to TVCG.

Wesley Miller: add link

2016-05-25T18:57:34Z

add link

← Older revision		Revision as of 18:57, 25 May 2016
Line 3:		Line 3:
	My work on making the Vrui toolkit compatible with the CAVE and YURT as well as our research applications can be found at https://github.com/jonovotny/VruiScalable. As of this writing, it is managed by [[User:Johannes Novotny\|Johannes Novotny]].		My work on making the Vrui toolkit compatible with the CAVE and YURT as well as our research applications can be found at https://github.com/jonovotny/VruiScalable. As of this writing, it is managed by [[User:Johannes Novotny\|Johannes Novotny]].

	Data from my Master's project, ''Virtually Visualizing Vessels: A Study of the Annotation of Placental Vasculature from MRI in Large-scale Virtual Reality for Surgical Planning'', is in a private repository also under the management of [[User:Johannes Novotny\|Johannes Novotny]]. As of this writing, the thesis has been submitted to the department~~, but there is no available link~~, and we are also preparing to submit it to TVCG.		Data from my Master's project, ''Virtually Visualizing Vessels: A Study of the Annotation of Placental Vasculature from MRI in Large-scale Virtual Reality for Surgical Planning'', is in a private repository also under the management of [[User:Johannes Novotny\|Johannes Novotny]]. As of this writing, the thesis has been submitted to the department, and it will be listed on http://cs.brown.edu/research/pubs/theses/masters/; we are also preparing to submit it to TVCG.

Wesley Miller: legacy information

2016-05-25T18:56:03Z

legacy information

← Older revision		Revision as of 18:56, 25 May 2016
Line 1:		Line 1:
	Master's ~~student working~~ on CAVE ~~stuff~~		I worked as a visiting RPI undergraduate on $G maintenance and CAVE applications from the summer of 2012 to the summer of 2014. I worked on my Master's degree at Brown from then until May 2016.

			My work on making the Vrui toolkit compatible with the CAVE and YURT as well as our research applications can be found at https://github.com/jonovotny/VruiScalable. As of this writing, it is managed by [[User:Johannes Novotny\|Johannes Novotny]].

			Data from my Master's project, ''Virtually Visualizing Vessels: A Study of the Annotation of Placental Vasculature from MRI in Large-scale Virtual Reality for Surgical Planning'', is in a private repository also under the management of [[User:Johannes Novotny\|Johannes Novotny]]. As of this writing, the thesis has been submitted to the department, but there is no available link, and we are also preparing to submit it to TVCG.

Wesley Miller at 20:46, 12 December 2014

2014-12-12T20:46:32Z

← Older revision		Revision as of 20:46, 12 December 2014
Line 1:		Line 1:
	~~Summer REU~~ student working on ~~Cave~~ stuff		Master's student working on CAVE stuff

Wesley Miller: Replaced content with "Summer REU student working on Cave stuff"

2012-06-12T18:48:50Z

Replaced content with "Summer REU student working on Cave stuff"

← Older revision		Revision as of 18:48, 12 June 2012
Line 1:		Line 1:
	Summer REU student working on Cave stuff		Summer REU student working on Cave stuff
	~~== Goals ==~~
	*Learn more about graphics and virtual reality
	*Build cave painting in the graphics lab, in the old cave, and for the new cave
	*Assist in modifying the cave software to blend the projector images correctly and correctly account for image distortion caused by the curved screen
	~~== Steps For Building Cave Painting ==~~
	~~Note:Replace $G with the absolute directory path of your sandbox. Although $G is recognized by the cd command, it cannot be used in include statements in c++ source files.~~
	~~#Gather Required Packages~~
	~~#*vrg3d~~
	~~#*cvs: common, import, project~~
	~~#*build utility, gg~~
	~~#*import/vrpn_7.28_gcc_64~~
	~~#*import/g3d_8.01_64~~
	~~#*sdl.rpm~~
	~~#*project/kuchora/cavepainting~~
	~~#Follow [[Set_up_your_environment_for_diffusion_MRI_processing]] tutorial~~
	#Change all include vrg3d header file statements in $G/common/kuchora to correct filepath*
	#Change all include MMotion header file statements in $G/common/kuchora to correct filepath*
	~~#Make in $G/common/kuchora~~
	~~#Make install in $G/common/kuchora~~
	~~#Make in $G/common/MMotion~~
	~~#Make install in $G/common/MMotion~~
	~~#In $G/project/kuchora/cavepainting/main.cpp~~
	~~#*change #include <kuchora/Kuchora.H> to #include <$G/common/kuchora/Kuchora.H>~~
	~~#In $G/common/kuchora/AnnotationModel.H~~
	~~#*change #include <kuchora/KuchoraBase.H> to #include <$G/common/kuchora/include/kuchora/KuchoraBase.H>~~
	~~#In $G/common/kuchora/TextInputWidget.H~~
	~~#*change #include <kuchora/EventMgr.H> to #include <$G/common/kuchora/include/kuchora/EventMgr.H>~~
	~~#*change #include <kuchora/GfxMgr.H> to #include <$G/common/kuchora/include/kuchora/GfxMgr.H>~~
	~~#In $G/common/kuchora/BrushState.H~~
	~~#*change #include <kuchora/KuchoraBase.H> to #include <$G/common/kuchora/include/kuchora/KuchoraBase.H>~~
	~~#In $G/common/kuchora/CavePaintingCursors.H~~
	~~#*change #include <kuchora/GfxMgr.H> to #include <$G/common/kuchora/include/kuchora/GfxMgr.H>~~
	~~#In $G/common/kuchora/PointModel.H~~
	~~#*change #include <kuchora/KuchoraBase.H> to #include <$G/common/kuchora/include/kuchora/KuchoraBase.H>~~
	~~#In $G/common/kuchora/FishtankDepthCues.H~~
	~~#*change #include <kuchora/GfxMgr.H> to #include <$G/common/kuchora/include/kuchora/GfxMgr.H>~~
	~~#*change #include <kuchora/KuchoraBase.H> to #include <$G/common/kuchora/include/kuchora/KuchoraBase.H>~~
	~~#In $G/common/kuchora/TriStripModel.H~~
	~~#*change #include <kuchora/KuchoraBase.H> to #include <$G/common/kuchora/include/kuchora/KuchoraBase.H>~~
	~~#In $G/common/kuchora/WorkingLimits.H~~
	~~#*change #include <kuchora/GfxMgr.H> to #include <$G/common/kuchora/include/kuchora/GfxMgr.H>~~
	~~#In $G/common/kuchora/HCIMgr.H~~
	~~#*change #include <kuchora/KuchoraBase.H> to #include <$G/common/kuchora/include/kuchora/KuchoraBase.H>~~
	~~#In $G/common/kuchora/ForceNetInterface.H~~
	~~#*change #include <kuchora/KuchoraBase.H> to #include <$G/common/kuchora/include/kuchora/KuchoraBase.H>~~
	~~#In $G/common/kuchora/Selection.H~~
	~~#*change #include <kuchora/KuchoraBase.H> to #include <$G/common/kuchora/include/kuchora/KuchoraBase.H>~~
	~~#In $G/common/kuchora/Markers.H~~
	~~#*change #include <kuchora/KuchoraBase.H> to #include <$G/common/kuchora/include/kuchora/KuchoraBase.H>~~
	~~#In $G/common/kuchora/AnnotationModel.H~~
	~~#*change #include <kuchora/MoveMarkersHCI.H> to #include <$G/common/kuchora/include/kuchora/KuchoraBase.H>~~
	~~#In $G/common/kuchora/Shadows.H~~
	~~#*change #include <kuchora/KuchoraBase.H> to #include <$G/common/kuchora/include/kuchora/KuchoraBase.H>~~

	*Will be expanded upon

Wesley Miller at 17:16, 12 June 2012

2012-06-12T17:16:47Z

← Older revision		Revision as of 17:16, 12 June 2012
Line 16:		Line 16:
	#Follow [[Set_up_your_environment_for_diffusion_MRI_processing]] tutorial		#Follow [[Set_up_your_environment_for_diffusion_MRI_processing]] tutorial
	#Change all include vrg3d header file statements in $G/common/kuchora to correct filepath*		#Change all include vrg3d header file statements in $G/common/kuchora to correct filepath*
	#Change all include ~~MMarker~~ header file statements in $G/common/kuchora to correct filepath*		#Change all include MMotion header file statements in $G/common/kuchora to correct filepath*
	#Make in $G/common/kuchora		#Make in $G/common/kuchora
			#Make install in $G/common/kuchora
			#Make in $G/common/MMotion
			#Make install in $G/common/MMotion
	#In $G/project/kuchora/cavepainting/main.cpp		#In $G/project/kuchora/cavepainting/main.cpp
	#*change #include <kuchora/Kuchora.H> to #include <$G/common/kuchora/Kuchora.H>		#*change #include <kuchora/Kuchora.H> to #include <$G/common/kuchora/Kuchora.H>

Wesley Miller at 16:39, 12 June 2012

2012-06-12T16:39:35Z

← Older revision		Revision as of 16:39, 12 June 2012
Line 1:		Line 1:
	Summer REU student working on Cave stuff		Summer REU student working on Cave stuff

	== Goals ==		== Goals ==
	*Learn more about graphics and virtual reality		*Learn more about graphics and virtual reality
	*Build cave painting in the graphics lab, in the old cave, and for the new cave		*Build cave painting in the graphics lab, in the old cave, and for the new cave
	*Assist in modifying the cave software to blend the projector images correctly and correctly account for image distortion caused by the curved screen		*Assist in modifying the cave software to blend the projector images correctly and correctly account for image distortion caused by the curved screen

	== Steps For Building Cave Painting ==		== Steps For Building Cave Painting ==
	Note:Replace $G with the absolute directory path of your sandbox. Although $G is recognized by the cd command, it cannot be used in include statements in c++ source files.		Note:Replace $G with the absolute directory path of your sandbox. Although $G is recognized by the cd command, it cannot be used in include statements in c++ source files.

Wesley Miller at 16:39, 12 June 2012

2012-06-12T16:39:22Z

← Older revision		Revision as of 16:39, 12 June 2012
Line 52:		Line 52:
	#In $G/common/kuchora/Shadows.H		#In $G/common/kuchora/Shadows.H
	#*change #include <kuchora/KuchoraBase.H> to #include <$G/common/kuchora/include/kuchora/KuchoraBase.H>		#*change #include <kuchora/KuchoraBase.H> to #include <$G/common/kuchora/include/kuchora/KuchoraBase.H>


	*Will be expanded upon		*Will be expanded upon